Professional mechanic working in workshop

Information only. This page provides general educational information about fault code P1760. We do not assess the urgency or safety implications of any specific fault. That requires in-person diagnosis by a qualified mechanic. Full terms.

Recommended next steps

Whether a fault is urgent, drivable, or routine depends entirely on the cause on a specific vehicle, and that can only be determined by a qualified mechanic with diagnostic equipment. If a warning light is illuminated, the most reliable next step is professional diagnosis.

What does P1760 mean?

P1760 is a Powertrain (engine, transmission, fuel system) fault code. It indicates: TCM Supply Voltage Interrupted (4L30-E).

Manufacturer-specific notes

Some manufacturers publish additional definitions or variations for this code. Always cross-check with your vehicle's own service documentation.

Cadillac TCM Supply Voltage Interrupted (4L30-E)
Chevrolet Transmission Position Sensor Signal
Ford A/T EPC Solenoid Circuit Malfunction
GMC Transmission Position Sensor Signal
Infiniti A/T Overrun Clutch Solenoid Valve Circuit Malfunction:
Jaguar Linear Solenoid for Line Pressure Control Circuit Malfunction (Shift Solenoid Valve ST)
Land Rover Linear Solenoid for Line Pressure Control Circuit Malfunction (Shift Solenoid Valve ST)
Lexus Linear Solenoid for Line Pressure Control Circuit Malfunction (Shift Solenoid Valve ST)
Mazda Linear Solenoid for Line Pressure Control Circuit Malfunction (Shift Solenoid Valve ST)
Nissan A/T Overrun Clutch Solenoid Valve Circuit Malfunction
Renault Linear Solenoid for Line Pressure Control Circuit Malfunction (Shift Solenoid Valve ST)
Toyota Linear Solenoid for Line Pressure Control Circuit Malfunction (Shift Solenoid Valve ST)
Vauxhall Linear Solenoid for Line Pressure Control Circuit Malfunction (Shift Solenoid Valve ST)
Volvo Linear Solenoid for Line Pressure Control Circuit Malfunction (Shift Solenoid Valve ST)

About Gearbox codes

Gearbox (transmission) codes report faults from the transmission control module: solenoid issues, fluid pressure problems, slipping clutches on dual-clutch boxes, and torque converter faults. Many trigger limp mode that locks the gearbox into a single forward gear.

P1760 is one of 643 codes in this category. Browse all Gearbox codes →

What we know about P1760 specifically

We record the SAE J2012 standardised definition and the system this code belongs to, but we have not yet published detailed driver-reported symptoms, common causes, or step-by-step diagnostic guidance for P1760.

Rather than invent that information by generating generic content from a template, we leave it out. For specific guidance, the most reliable sources are:

  • your vehicle's own service manual or manufacturer-specific technical bulletins
  • a qualified mechanic with a manufacturer-level diagnostic tool
  • a marque specialist familiar with your make and model

Spotted an issue or have something to add? Mechanics, technicians, and drivers who have first-hand experience with P1760 can submit a correction or expansion. We review every submission before publishing, mechanic submissions are prioritised.

Information only, not professional advice

The information on this page is provided for general guidance and educational purposes only. It is not a substitute for diagnosis or repair advice from a qualified mechanic. Always verify any fault before paying for repairs. carfaultcodes.co.uk accepts no liability for decisions made based on this information. Full terms →

Help us improve the P1760 page
Spotted an error, missing detail, or have first-hand experience to add? Tell us, we review every submission.
+
Reporting on: P1760

Mechanic submissions are prioritised for review.

We read everything but can't always reply. By submitting you agree to our privacy policy.