Is it safe to drive with this code?

Driving may be possible but is not recommended. The vehicle will often enter limp mode, which limits acceleration and can create unpredictable throttle response, posing a risk in traffic or during overtaking manoeuvres. It's advisable to arrange repair promptly to avoid potential safety issues (see our disclaimer).

It may affect your MOT outcome if the malfunction indicator lamp (MIL) is illuminated at the time of the test, as a persistent emissions warning can lead to a fail. The outcome depends on whether the light is on during inspection (see our disclaimer).

Roughly how much does it cost to fix?

Costs vary considerably depending on the root cause. Simple wiring repairs may fall into the low three-figure range, whilst ECM reprogramming can reach the mid three-figure band. If full ECM replacement is needed, expect high three-figure to four-figure costs at a main dealer, though independent specialists may offer more competitive rates.

Can I reset the code myself and continue driving?

Whilst you can clear the code with a scanner, it will typically return if the underlying fault persists. The vehicle may re-enter limp mode, and driving in this condition can place strain on the engine and pose safety risks. Professional diagnosis is recommended to identify and resolve the cause properly.

Professional mechanic working in workshop

← All fault codes | ABS / ESP

P061F

Powertrain

Internal Control Module Brake Signal Performance

The engine control module has detected an inconsistency in its internal throttle actuator control system, typically affecting vehicles with electronic throttle control.

garage.co.uk

Need a garage?

Compare quotes from verified UK garages near you.

→

car.co.uk

Sell your car

We specialise in problem cars: warning lights, faults, high mileage. Fair instant offer.

→

trader.co.uk

List your car

Free private listing. Reach thousands of UK buyers, no fees.

→

ⓘ Information only. This page provides general educational information about fault code P061F. We do not assess the urgency or safety implications of any specific fault. That requires in-person diagnosis by a qualified mechanic. Full terms.

Recommended next steps

Whether a fault is urgent, drivable, or routine depends entirely on the cause on a specific vehicle, and that can only be determined by a qualified mechanic with diagnostic equipment. If a warning light is illuminated, the most reliable next step is professional diagnosis.

What does P061F mean?

P061F is a Powertrain (engine, transmission, fuel system) fault code. It indicates: Internal Control Module Brake Signal Performance.

This is a standardised OBD-II code. The technical definition is the same regardless of the make or model of vehicle, although specific causes and symptoms can vary between vehicles.

About ABS / ESP codes

Codes in this category relate to the anti-lock braking system (ABS) and electronic stability control (ESP/ESC). These systems share wheel speed sensors, hydraulic modulators, and a common control module. Faults here usually disable ABS pulse braking and stability control assistance, but standard hydraulic brakes continue working normally.

P061F is one of 429 codes in this category. Browse all ABS / ESP codes →

What we know about P061F specifically

We record the SAE J2012 standardised definition and the system this code belongs to, but we have not yet published detailed driver-reported symptoms, common causes, or step-by-step diagnostic guidance for P061F.

Rather than invent that information by generating generic content from a template, we leave it out. For specific guidance, the most reliable sources are:

•your vehicle's own service manual or manufacturer-specific technical bulletins
•a qualified mechanic with a manufacturer-level diagnostic tool
•a marque specialist familiar with your make and model

Codes nearby

Codes adjacent to P061F in the P-code series. Many fault codes appear together with their neighbours because they relate to the same circuit or component.

P061C Internal Control Module Engine RPM Performance

P061D Internal Control Module Engine Air Mass Performance

P061E Internal Control Module Brake Signal Performance

P0620 Generator Control Circuit Malfunction

P0621 Generator Lamp L Control Circuit Malfunction

P0622 Generator Field F Control Circuit Malfunction

Other ABS / ESP codes

Other fault codes in the same system as P061F. The ones with detailed guides have plain-English explanations, symptoms, causes, and diagnostic steps.

B1106

Shift Lock Circuit Failure Detailed guide

C0021

Left Front Wheel Speed Sensor Circuit Detailed guide

C0035

Left Front Wheel Speed Sensor Circuit Range/Performance Detailed guide

C1000

Abnormality in Stoplight Switch Circuit Detailed guide

C1602

Manufacturer-Specific Chassis/ABS Fault Detailed guide

B1082

ORC-Occupant Restraint Control-Fps-Fire Protection Strategy-Activated

Spotted an issue or have something to add? Mechanics, technicians, and drivers who have first-hand experience with P061F can submit a correction or expansion. We review every submission before publishing, mechanic submissions are prioritised.

Information only, not professional advice

The information on this page is provided for general guidance and educational purposes only. It is not a substitute for diagnosis or repair advice from a qualified mechanic. Always verify any fault before paying for repairs. carfaultcodes.co.uk accepts no liability for decisions made based on this information. Full terms →

✎

Help us improve the P061F page

Spotted an error, missing detail, or have first-hand experience to add? Tell us, we review every submission.