Is it safe to drive with this code?

Driving with P060F active is not recommended, as it can lead to unpredictable engine behaviour such as sudden stalling, poor performance, or starting failures—often without warning. See our legal disclaimer for advice on using a qualified technician.

It may affect your MOT outcome if the Check Engine lamp is illuminated at the time of test. The key factor is whether the malfunction indicator light is on during inspection—refer to our site disclaimer for further guidance.

Roughly how much does it cost to fix?

Repair costs can range from low three-figure sums for sensor or connector replacement at an independent garage to high three-figure or even four-figure amounts if the control module itself needs replacing or reprogramming at a main dealer. The wide variation depends on whether the fault lies in external wiring or the module, parts availability, and labour rates.

Can I just replace the coolant temperature sensor?

In some cases, yes—a faulty ECT sensor or corroded connector can trigger P060F. However, this code often indicates an internal control-module issue rather than a simple sensor fault, so professional diagnosis is recommended to avoid unnecessary parts replacement.

Professional mechanic working in workshop

← All fault codes | ECU

P060F

Powertrain

Internal Control Module Coolant Temperature Performance

The engine control module has detected an inconsistency in the way it's processing coolant temperature sensor data internally, which may point to a fault within the module itself rather than the sensor.

garage.co.uk

Need a garage?

Compare quotes from verified UK garages near you.

→

car.co.uk

Sell your car

We specialise in problem cars: warning lights, faults, high mileage. Fair instant offer.

→

trader.co.uk

List your car

Free private listing. Reach thousands of UK buyers, no fees.

→

ⓘ Information only. This page provides general educational information about fault code P060F. We do not assess the urgency or safety implications of any specific fault. That requires in-person diagnosis by a qualified mechanic. Full terms.

Recommended next steps

Whether a fault is urgent, drivable, or routine depends entirely on the cause on a specific vehicle, and that can only be determined by a qualified mechanic with diagnostic equipment. If a warning light is illuminated, the most reliable next step is professional diagnosis.

What does P060F mean?

P060F is a Powertrain (engine, transmission, fuel system) fault code. It indicates: Internal Control Module Coolant Temperature Performance.

This is a standardised OBD-II code. The technical definition is the same regardless of the make or model of vehicle, although specific causes and symptoms can vary between vehicles.

About ECU codes

Engine control unit (ECU) codes relate to the main engine computer itself, its memory, internal processors, supply voltage, or its ability to communicate with sensors and actuators. These are often electrical or wiring-related rather than mechanical faults.

P060F is one of 1,108 codes in this category. Browse all ECU codes →

What we know about P060F specifically

We record the SAE J2012 standardised definition and the system this code belongs to, but we have not yet published detailed driver-reported symptoms, common causes, or step-by-step diagnostic guidance for P060F.

Rather than invent that information by generating generic content from a template, we leave it out. For specific guidance, the most reliable sources are:

•your vehicle's own service manual or manufacturer-specific technical bulletins
•a qualified mechanic with a manufacturer-level diagnostic tool
•a marque specialist familiar with your make and model

Codes nearby

Codes adjacent to P060F in the P-code series. Many fault codes appear together with their neighbours because they relate to the same circuit or component.

P060C Internal Control Module Main Processor Performance

P060D Internal Control Module Accelerator Pedal Position Performance

P060E Internal Control Module Throttle Position Performance

P0610 Control Module Vehicle Options Error

P0611 Fuel Injector Control Module Performance

P0612 Fuel Injector Control Module Relay Control

Other ECU codes

Other fault codes in the same system as P060F. The ones with detailed guides have plain-English explanations, symptoms, causes, and diagnostic steps.

B1049

Passenger-Side Pre-Tensioner Seat Belt And Other Air Bag Module Circuits Short Detailed guide

P0606

ECM/PCM Processor Fault Detailed guide

U0001

High Speed CAN Communication Bus Detailed guide

U0100

Lost Communication With ECM/PCM Detailed guide

B1000

A/C Switch Request Input Circuit/Performance

B1001

Multiplex Integrated Control Unit (MICU) Internal Error

Spotted an issue or have something to add? Mechanics, technicians, and drivers who have first-hand experience with P060F can submit a correction or expansion. We review every submission before publishing, mechanic submissions are prioritised.

Information only, not professional advice

The information on this page is provided for general guidance and educational purposes only. It is not a substitute for diagnosis or repair advice from a qualified mechanic. Always verify any fault before paying for repairs. carfaultcodes.co.uk accepts no liability for decisions made based on this information. Full terms →

✎

Help us improve the P060F page

Spotted an error, missing detail, or have first-hand experience to add? Tell us, we review every submission.